vst tillers banner
vst tillers Banner 2
vst tillers Banners 3
vst tillers Banners 4
vst tillers Banners 5
Mitsubishi Shakti MT 180 D Tractor with Rotary


  • Specification
  • Warranty & Support
SPECIFICATIONS
ENGINE
MODEL K3C
Type : 3 Cylinder, 4 Stroke, Over Head Valve
Bore 70mm (2.75in)
Stroke 78mm (3.07in)
Displacement (Swept Volume) 900cu.cm(54.9 cu.in)
Max. Torque 5.2 Kg-m (1900 rpm)
Output / Rated 18.5 hp / 2700rpm (IS : 10,000)
S.F.C. (Specific Fuel Consumption) 230 gm/hp-hr
COOLING SYSTEM Water-cooled Radiator with compensatory tank
Dry Weight 125 Kgs
Starting System Starter Motor 12 Volts - 1.6 KW
FUEL SYSTEM
Fuel High Speed Diesel Oil (H.S.D)
Fuel Tank Capacity 18 liters
Air Cleaner 3 stage Oil Bath Type
LIGHTING SYSTEM
Lighting 12 volts, 35 watts
Alternator 12 volts, 40 Amps
Glow Plug 12 volts Quick Heat Type
TRANSMISSION
Transmission Selective Sliding Gear
Forward: 6 Speeds
Reverse 2 Speeds with differential lock
Traveling Speed 1.2 kmph (min.) / 14.0 kmph (max)
Power Take Off (P.T.O) 13/8" - SAE Std Spline Shaft, 3 speeds 623, 919 & 1506 RPM at 2700 eng. rpm
Brake Water proof internal expanding shoe type brake with parking brake
Tyres Front 5-12, Rear 8-18 Tread Width 740, 890 mm
Overall Dimensions Width 1025mm, Height 1475mm Length 2565mm, Wheel Base 1422mm CG 225mm,
Ground Clearance 230 mm
Turning Radius W/o Brake 2.5m & W/Brake 2.1m
Hauling 2 Wheel Trailer, 3 Tones (Gross weight)
Rotary Side Drive Type
Weight 645 Kgs. (With Rotary)
PERFORMANCE
Tilling Width 1100mm
No. of Tynes 28
Tilling Depth 150mm
Plough Depth 220mm
SPEEDS (Standard Pulley)
Forward: L1 - 1.23 km/hr
L2 - 1.87 km/hr
L3 - 3.18 km
H1 - 5.43 km/hr
H2 - 8.22 km/hr
H3 - 13.98 km/hr
Reverse: Low - 1.58 km/hr
High - 6.93 km/hr
:: The performance of the product and its attachments are stated under Standard Test Conditions. Design and specifications may change due to continuous improvement.